Convertisseur élévateur CC à CC haute tension pour transformateur LED

N ° de modèle: WXESD-350C-5 Garantie: 2 ans Tension d'entrée: 110-220V Mode de démarrage: Alimentation à découpage auto-excitée Système d'alimentation: Système de distribution d'alimentation: PFM Marque: MEAN WELL Transport Package: Emballage standard d'exportation Origine: Zhejiang Type de sortie: Puissance de sortie unique: 101 - 200W Mode de connexion: Série Alimentation à découpage Mode de régulation de tension: Type de modulation de fréquence Transmission d'énergie: Transmission à deux voies Certification: CE, RoHS, ISO, CCC, CB, CSA Marque: OMWO Spécification: 159 * 98 * 38mm Code SH: 8504401990 WXESD-350C-5 5V 60A haute tension convertisseur dc à dc convertisseur élévateur pour transformateur led \ n350W convertisseur DC-DC à sortie unique série SD-350C \ nCaractéristiques: \ n2: 1 large plage d'entrée \ nProtections: court-circuit / surcharge / surtension / surchauffe \ nConfiguration E / S 1500VAC Refroidissement à l'air forcé par ventilateur CC intégré \ n Test de rodage à 100% à pleine charge \ n24V (B) et 48V (C ) la conception de la tension d'entrée se réfère à la garantie LVD \ n2 ans

SPECIFICATION
OUTPUT
Model	WXESD-350C
DC Voltage	5V	12V	24V	48V
Rated Current	60A	27.5A	14.6A	7.3A
Current Range	0~60A	0~27.5A	0~14.6A	0~7.3A
Rated Power	300W	330W	350.4W	350.4W
Ripple & Noise	100mVp-p	120mVp-p	150mVp-p	200mVp-p
Voltage Adj. Range	4.5~5.5VDC	11~16VDC	23~30VDC	43~53VDC
Voltage Tolerance	±2.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.3%	±0.2%	±0.2%
Load Regulation	±1.0%	±1.0%	±1.0%	±1.0%
Setup, Rise Time	300ms,50ms at full load
INPUT
Voltage Range	36~72VDC
Efficiency	76%	81%	81%	82%
DC Current	7.6A/48V	8.8A/48V	9.0A/48V	9.0A/48V
Inrush Current	45A/48VDC
PROTECTION
Over Load	105~135% rated output power
	Protection type: Shut down o/p voltage,re-power on to recover
Over Voltage	5.75~6.75V	16.8~20V	31.5~37.5V	53~65V
	Protection type: Shut down o/p voltage,re-power on to recover
Over Temperature	95ºC± 5ºC(TSW1) detect on main power transistor
	Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
Working Temp.	-20~+60ºC (Refer to "Derating Curve")
Working Humidity	20~90%RH non-condensing
Storage Temp., Humidity	-40~+85ºC,10~95%RH
Temp. Coefficient	±0.03%/ºC (0~50ºC)
Vibration	10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC
Safety Standards	IEC60950-1CB approved by TUV(for D type only)
Withstand Voltage	I/P-O/P:1.5KVAC   I/P-FG:1.5KVAC   O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25ºC /70%RH
EMC Emission	Compliance to EN55022(CISPR22) Class B
EMC Immunity	Compliance to EN61000-4-2,3,4,6,8,light industry level,criteria A
OTHERS
Dimension	215*115*50mm(L*W*H)
Weight	1.1Kg
Packing	12pcs/14.4Kg/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

\ n \ n

Groupes de Produits : Alimentation à découpage simple