Alimentation de haute qualité 5V 12V 24V 48V 60W (S-60)

N ° de modèle: S-60-1 Garantie:> 2 ans Tension d'entrée: 24V Mode de démarrage: Alimentation à découpage auto-excitée Système d'alimentation: Système de distribution de l'équipement de distribution terminal: PFAW Marque: Omwo Marque: OMWO Origine: Zhejiang : Puissance de sortie simple: 1 - 50W Mode de connexion: Série Alimentation à découpage Mode de régulation de tension: Type de modulation de fréquence Transmission d'énergie: Transmission à deux voies Certification: CE, UL, RoHS, ISO, CCC, CB, CSA Taille: 159 * 98 * 38mm Spécification: 159 * 98 * 38mm Code SH: 8504401990 Alimentation 5V 12V 24V 48V 60w (S-60) Caractéristiques 1. Haute efficacité et bon prix 2. Filtre EMI intégré 3.100% test de rodage à pleine charge 4.Low Ondulation de sortie et bruit \ n5.Protection: Surcharge / Surtension / Court-circuit 6.LIFETIME WARRANTY! Caractéristiques

MODEL		S-60-5	S-60-12	S-60-15	S-60-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	12A	5A	4A	2.5A
	CURRENT RANGE	0 ~ 12A	0 ~ 5A	0 ~ 4A	0 ~ 2.5A
	RATED POWER	60W	60W	60W	60W
	RIPPLE & NOISE (max.)	120mVp-p	120mVp-p	150mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V
	VOLTAGE TOLERANCE	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±1.0%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	300ms, 50ms, /230VAC      800ms, 50ms/115VAC at full load
	HOLD TIME	90ms/230VAC      12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85~132VAC/170~264VACselected by switch
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	80%	85%	85%	86%
	AC CURRENT	2A/115VAC       1A/230VAC
	INRUSH CURRENT (max.)	COLD START 20A/115VAC 40A/230VAC
	LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed.
	OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V
		Protection type : Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C ,10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ (0 ~ 50)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	Desgin refer to UL1012,EN60950-1,EN61347-1,EN-61347-2 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMS	EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved
OTHERS	MTBF	316.2K hrs min. MIL-HDBK-217F (25)
	DIMENSION	159*97*38mm (L*W*H)
	PACKING	0.48Kg; 40pcs/20Kg
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Groupes de Produits : Alimentation à découpage simple