Wxe-10mdr-12 Industrial DIN Rail Power Supply

N ° de modèle: WXE-10MDR-12 Garantie:> 2 ans Tension d'entrée: 15V Mode de démarrage: Alimentation par commutation auto-excitée Système de fourniture d'alimentation: Système de modulation de l'équipement de distribution de terminal: PFAW Marque: Omwo Transport Package: Standard Export Emballage Origine: Zhejiang Type de sortie: Simple Puissance de sortie: 1 - 50W Mode de connexion: Série Commutation Tension d'alimentation Mode de régulation: Fréquence Type de modulation Transmission d'énergie: Transmission bidirectionnelle Certificat: CE, UL, RoHS, ISO, CCC, CB, CSA Marque: OMWO Spécifications: 159 * 98 * 38mm Code SH: 8504401990 Caractéristique:
• Entrée CA universelle / gamme complète
• Protections: court-circuit / surcharge / surtension
• Refroidissement par convection à l'air libre
• Peut être installé sur rail DIN TS-35 / 7.5 ou 15
• Construit en signal actif DC OK
• Indicateur LED pour allumer
• Consommation sans charge <0.75W
• Test de brûlure 100% à pleine charge
• 3 ans de garantie

MODEL		WXE-10MDR-5	WXE-10MDR-12	WXE-10MDR-15	WXE-10MDR-24
OUTPUT	DC VOLTAGE	5V	12V	15V	24V
	RATED CURRENT	2A	0.84A	0.67A	0.42A
	CURRENT RANGE	0~2A	0-0.84A	0-0.67A	0-0.42A
	RATED POWER	10W	10W	10W	10W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	120mVp-p	120mVp-p	150mVp-p
	VOLTAGE TOLERANCE Note.3	±5.0%	±3.0%	±3.0%	±2.0%
	LINE REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
	LOAD REGULATION	±5.0%	±3.0%	±3.0%	±2.0%
	SETUP, RISE TIME Note.5	500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	120ms/230VAC 25ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC 120-370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	77%	81%	81%	84%
	AC CURRENT (Typ.)	0.33A/115VAC 0.21A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 35A/115VAC 70A/230VAC
	LEAKAGE CURRENT	<1mA/240VAC
PROTECTION	OVERLOAD	Above 105% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed
	OVERVOLTAGE	5.75-6.75V	13.8-16.2V	17.25-20.25V	27.6-32.4V
		Protection type: Shut down o/p voltage, re-power on to recover
FUNCTION	DC OK ACTIVE SIGNAL (max.)	3.75 ~6V/ 50mA	9 - 13.5V/40mA	11.5-16.5V/40mA	18-27V/20mA
ENVIRONMENT	WORKING TEMP.	-20 ~ +70°C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 - 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85°C ,10- 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 - 50°C)
	VIBRATION	Component: 10 - 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY &       EMC    (Note 4)	SAFETY STANDARDS	UL508, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	l/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC
	ISOLATION RESISTANCE	l/P-O/P, l/P-FG, 0/P-FG:100M Ohms/500VDC/25°C/70% RH
	EMC EMISSION	Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2.-3
	EMC IMMUNITY	Compliance to EN610004-2,3,4,5,6,8,11, EN55024.EN61000-6-1 ,EN61204-3, light industry level, criteria A
OTHERS	MTBF	584Khrsmin. MIL-HDBK-217F (25°C)
	DIMENSION	22.5*90*100mm (W*H*D)
	PACKING	0.17Kg; 72pcs/13.2Kg/0.91CUFT
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.  Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." 5.  Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

Application du produit:
• Série d'outils électriques: Scie électrique, perceuse, Ginder, Machine à soufflerie de sable, Machine à poche, Machine à désherbage, Compresseur d'air, etc.
• Série de bureau: ordinateur, imprimante, moniteur LCD, machine à balayage, etc.
• Série d'électroménager: collecteur de poussière, lampe de ventilateur ou LED, machine à coudre, etc.
• Série d'appareils de cuisine: Four à micro-ondes, Réfrigérateur, Freezr, Coffemarker, etc.
• Série d'équipements industriels: expédition, véhicule, lampe halogénure de métal, système solaire, production d'énergie éolienne, etc.
• Série électrique: TV, VCRS, Radio etc.

Groupes de Produits : Rail d'alimentation Din